Safeway Cosmos Installation Instructions Manual page 13

Install for Group 1 (9 to 18kg) - Use with Internal Harness
1 - Pull the vehicle seat belt out as far as possible.
2 - Guide the vehicle seat belt tongue from the front of the seat through the slot
on the side of the seat. The shoulder belt should lie between the headrest
and the backrest, and the lapbelt section should lie underneath the armrest
(Fig.1).
3 - Pull the seat belt all the way through towards the back of the seat and then
thread it between the shell and harness system and then guide the tongue
back through the other side towards the front of the seat (Fig.2).
4 - Guide the tongue underneath the armrest then insert it into the buckle
(Fig.3). Ensure that it CLICKS into place properly (Fig.4).
5 - Place your child in the child seat, fasten the buckle and tighten the straps
(Fig.5&6).
1
4
2
5
12
3
6