3 - Power ON
Note: The ALTITRACK must be switched ON prior to entering the airplane
Press Right or Left Front Button until "ACCESS" and
"LOW BAT" flashes. Then release the button.
The ALTITRACK can be used for jumping, if:
- The pointer moves from "6" to "0".
- Battery capacity is sufficient.
The ALTITRACK MUST NOT be used for jumping, if:
- The LCD on the rear side displays an Error code
(ex.: ERR2, ERR3, ERR4, ERR5, ERR100).
Battery status
- The unit sounds a beep every minute.
- Battery capacity is insufficient.
Fig. 5 – Power ON
16