Jump Mode; Power Off - Larsen & Brusgaard ALTITRACK Manual

4 - Jump Mode

- Entering Jump Mode: Shortly after take-off (at approx. 1,000 feet/300 meters) the
ALTITRACK switches to Jump Mode and the pointer moves to the present altitude. On
the rear side LCD the "airplane icon" starts to flash.
- Exiting Jump Mode: The ALTITRACK exits Jump Mode automatically within one minute
after it senses ground level again. If the ALTITRACK has been preset to a different
altitude it exits Jump Mode as described in paragraph 6.

5 - Power OFF

1. Press and let go of Right Front Button
2. When "ACCESS" lights, press immediately and let go again
3. When "ACCESS" lights, press immediately and let go again
4. When "ACCESS" lights, press immediately and let go again
The pointer moves to "6" and unit switches OFF
Fig. 7 – Power OFF
18