Table of Contents
Advertisement
13 - Replacing the Battery
Fig. 28 – Battery cover with screws
Fig. 29 - Battery
1. Unscrew and remove battery cover
2. Remove old battery
4. Install new battery noting polarity. Use SAFT LS 14250 (3.6V) or equivalent
5. Press a paperclip into the tiny (Reset) hole next to the battery and release
The unit restarts
6. Put battery cover back into place and fasten the 2 screws
After battery replacement, the battery system requires 2 minutes to calibrate itself
before showing the correct status. While calibrating, the battery icon toggles
between full and low.
54
Hide quick links:
Advertisement
Table of Contents
