Power On - Larsen & Brusgaard PROTRACK II Manual

5 - Power ON

The PROTRACK II has been powered OFF prior to shipping from our factory. To turn
the power ON, press and hold any key until the unit beeps, then release the key.
The PROTRACK II runs a self-test and sounds two beeps as it flashes the screen two
times. It then displays a "Device Info" screen.
24
Device Info
Battery capacity in mVolt
Barometric pressure in mbar (hPa)
Temperature (Celsius or Fahrenheit)
Free logbook storage in %
Firmware Version
After power up, the PROTRACK II enters Ground Mode.
In Ground Mode, the screen display will switch OFF after 60 seconds to save battery
power. However, the unit is still ready to jump.
The PROTRACK II uses very little power and does not need to be switched OFF.
However, we recommend that you switch OFF the PROTRACK II when traveling on
commercial flights, when driving in mountainous areas and when the jump season is
over. To power OFF the PROTRACK II, see "Power OFF" section.
25