Covers; Display Station Covers; Keyboard Covers - IBM 5251 11 Maintenance Information Manual

Covers
10P
DISPLAY STATION COVERS
CAUTION
Place the display station away from the edge of the
table to prevent damage to the covers.
To open the covers:
1. Loosen the cup screw
D
on the left side of the
display station.
2. Loosen the cup screw
II
on the right side of the
display station.
3.
4.
Hold the front half of the cover and pivot it toward
the front of the display station.
Hold the back half of the cover and pivot it toward
the rear of the display station.
To close the covers:
CAUTION
When reinstalling the covers, ensure that the cup of the
screw fits over the lip of the cover to prevent damage to
the cover and to ensure that the cover is securely
fastened down.
1. Pivot the front half of the cover toward the rear of
the display station.
2. Pivot the back half of the cover toward the front
of the display station.
3. Tighten the cup screws
D
and
II.
Ensure that
the cup fits over the lip on the cover.
109
KEYBOARD COVERS
Removal
1.
2.
Loosen the 4 screws on the bottom of the
keyboard assembly.
Lift the cover away from the keyboard.
Replacement
1.
2.
Place the cover on the keyboard assembly.
Tighten the 4 screws on the bottom of the
keyboard assembly.
Note: Ensure that the keys do not rub on the cover.
1-6