IBM 5251 11 Maintenance Information Manual page 105

209
(continued)
KBD-0011 INVALID KEY FOR SIGN POSITION OF
FIELD
You have attempted to enter data into the last
position of a signed numeric field.
KBD-0012 INSERT MODE-NO ROOM TO INSERT
DATA
There is no room to insert data into this field.
Either there is no more room in the field or the
cursor is in the last position of the field.
Do not use Insert mode to change data or enter
the last character into this field.
KBD-0013 INSERT MODE-ONLY DATA KEYS
ALLOWED
You are now in Insert mode; however, you have
pressed a nondata key. Only data keys are valid
after pressing the Ins key.
To use Insert mode, press the Ins key and then a
data key.
KBD-0014 MANDATORY FILL FIELD-MUST FILL TO
EXIT
You have pressed a function key that would move
the cursor out of this field; however, the cursor is
not in the first or last position of this mandatory
fill field. A mandatory fill field must be completely
filled unless you exit the field from the first
position in the field and no data is entered into the
field.
Enter data to the end of the field or move the
cursor to the start of the field and then use the
Field -, Field +, or Field Exit key to blank all of the
field.
KBD-0015 CHECK DIGIT ERROR
The number and the check digit you have just
entered do not compare.
KBD-0016 FIELD MINUS KEY INVALID WITH THIS
FIELD
You have pressed the Field - key, but the field
you are in is not a signed numeric field.
1·84
You can either continue to enter data or press the
Field Exit key to leave the field.
KBD-0017 MANDATORY FILL FIELD-KEY USED
INVALIDLY
You have pressed the Field -, Field +, or Field Exit
key; however, the cursor is not in the first or last
position of this mandatory fill field; A mandatory
fill field must be completely filled unless you exit
the field from the first position in the field and no
data is entered into the field.
Enter data to the end of the field or move the
cursor to the start of the field and then use the
Field -, Field +, or Field Exit key to blank all of the
field.
KBD-0018 INVALID KEY USED TO EXIT THIS FIELD
The cursor is in the last position of this field. You
must use a nondata key (for example, the Field
Exit key) to leave this field.
KBD-0019 DUP KEY NOT ALLOWED IN THIS FIELD
You have pressed the Dup key; however, the Dup
key is not permitted in this field.
KBD-0020 ENTER KEY NOT ALLOWED IN THIS FIELD
You have pressed the Enter key; however, the
Enter key is not permitted in this field. This is
either a right adjust or a signed numeric field and
you must exit the field before pressing Enter.
Continue by pressing the Field +, Field -, or the
Field Exit key and then press the Enter key.
KBD-0021 MANDATORY ENTER FIELD-MUST ENTER
DATA
The cursor is positioned in a mandatory enter field.
A mandatory enter field must have data entered in
the field before you can exit the field.
KBD-0022 STATUS OF FIELD NOT KNOWN
A system error has occurred. The status of the
present field is not known. This error can occur
when the Del or Ins key is pressed.
KBD-0027 KEY NOT DEFINED-KEY CANNOT BE
USED
You pressed a key that is not used by this system.