Firmware Updates - OBSIDIAN CONTROL SYSTEMS NETRON EN4 User Manual

F I R M W A R E U P D A T E S
Updates for improved performance or to add additional features may be available on
www.obsidiancontrol.com.
To install a firmware upgrade, connect to the device through a web browser and open the
System – Maintenance menu.
Always back up the configuration first. Export to a file using the web interface.
- Upload the firmware file, then update the device. Do not power cycle during the update
process. The update is provided in two files, Display NFW and Web IMG. Both need to be
installed for a full
- Reset to factory defaults.
- Reload the configuration file from the web interface.
Confirm the upgrade is installed from the Information/Software Version Display.
If the system menu is corrupt and or cannot be opened, then the Netron device can be updated
from an IP address e.g. 2.26.206.242/update.html.
Each device has a unique Device IP
Address; the one shown is only an example.
Each device has a unique Device IP Address; the one shown is only an example.
38
upgrade.