Dmx Ports - OBSIDIAN CONTROL SYSTEMS NETRON EN4 User Manual

M E N U : D M X P O R T S
Select a port number to adjust its settings. Depending on the
Mode, certain options are not relevant and hidden from the
display or web interface.
SUB MENU
16
OPTIONS / VALUES
Universe 1 – 256
Disable
Input
Mode
Output
Send Value
Protocol Artnet, sACN, None
FrameRate 10, 15, 20, 25, 30, 35, 40
RDM Disabled, Enabled
OFF
HTP
Merge
LTP
Toggle
Clone None, Port 2, Port 3, Port 4
From: 1 – 512
Range
To: 1 – 512
Offset Addr Off, 2 - 511
Select the EtherDMX Universe
The port is disabled.
The port receives DMX values and assigns them to the
selected Universe.
The port sends out DMX Values on the selected
Universe
0 – 255 Send a static DMX value
Select the EtherDMX protocol per port
Select the desired frame rate.
Disable / Enable RDM traffic for this port
The merger is disabled
The sources are merged by Highest Takes
Precedence
The sources are merged by Last Takes Precedence
The complete source Universe is switched as soon as
a single value changes
Replicates the identical DMX data from another port
default 1
default 512
Offset start address, incoming channel X value is sent
on this port as channel X+Offset, Channels are cut off
if they exceed 512
DESCRIPTION