Ip Address - OBSIDIAN CONTROL SYSTEMS NETRON EN4 User Manual

M E N U : I P A D D R E S S
Set the desired device IP address in this menu. Every Netron
device is set to a unique 2.x.x.x address at the factory, and after
every reset to this default. For Artnet systems, it should never be
necessary to adjust this IP. Any custom address and subnet can
be assigned so the node can operate within any network
environment. EP4 devices default to 2.0.0.1 as they contain no
display. Configure each EP4 to a unique IP using the web remote
access.
SUB MENU
20
OPTIONS / VALUES
DHCP IP
Automatic 2.x
Automatic 10.x.x

IP Address

Custom IP
Subnet Mask
The device waits for a DHCP server address
After 30s it assigns itself a unique 169.254.x.x
address but continues to monitor DHCP server
requests.
The device is set to a unique 2.x.x.x Address, Subnet
255.0.0.0
The device is set to a unique 10.x.x.x Address,
Subnet 255.0.0.0
x.x.x.x
Assign any desired numbers. The device does not
check the validity of address and subnet values.
x.x.x.x
Description