Download Print this page

Lennox ELITE Series Installation Instructions page 2

Traditional face kits for use with the ravenna 33/40 and designer gas fireplace inserts

Advertisement

B
A = Speed nuts
B = Holes in the surround brackets - three on each side
C = Location where hooked brackets on face will hang
The face has two hooks on each side that slide over and hang on the
surround brackets at position C shown here. The face may slide slightly
from side to side to center the face on the glass.
Figure 2
f i r e - p a r t s . c o m
CAUTION: WHEN OPENING THE LOWER DOOR ON THE TRADITIONAL
FACE WHILE THE INSERT IS BURNING, ONE SHOULD PULL AT THE FAR
LEFT OR FAR RIGHT VENT OPENINGS AS THE DOOR IS HOT DURING
OPERATION.
Lennox Hearth Products reserves the right to make changes at any time, without notice, in
design, materials, specifications, prices and also to discontinue colors, styles and products.
Consult your local distributor for fireplace code information.
Printed in U.S.A. © 2010 Lennox Hearth Products
P/N 775254M REV. B 11/2010
2
A
C
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
B
Surround panel kit sold separately
Figure 3 - Completed Installation
1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210

Advertisement

loading

This manual is also suitable for:

Elite dbv-rdv f-b gElite dbv-rdv f-gElite dbv-rdv trdf-bnElite dbv-rdv trdf-bkn