Operation; Oscillator Section - Red Sound DarkStar Owner's Manual

8 voice polyphonic synthesizer
Table of Contents

Advertisement

OSCILLATOR SECTION

This section of DARKSTAR produces the musical tones which form the basis of subtractive synthesis. There are
two oscillators per 'voice' (musical note), each producing audible vibrations to act as a sound source. The timbre of
each oscillator depends on its harmonic content which is determined by the waveform. There are basically two
waveforms available, SAWTOOTH and RISING, each with its own specific set of harmonics.
Controls for changing the amount of modulation to the pitch timbre of the oscillators are also included in this
section. These timbral and pitch modulations give the oscillator sound more depth and stimulate musical appeal to
the ear.
OSCILLATOR SELECT button
This large button switches between oscillator 1 and 2. When the indicator is OFF, oscillator 1 will be selected.
When the indicator is ON, oscillator 2 will be selected.
WAVEFORM
(OSC 2 PITCH)
This control has two functions determined by the [SHIFT] button.
When the [SHIFT] function is
At the fully anti-clockwise position (
every harmonic in decreasing volume and produces a very rich sound. As the control is moved in a clockwise
direction the shape progressively changes, becoming more and more 'squared-off' until, at the fully clockwise
position (
) the shape will be a SQUARE or 'pulse' waveform. As a pure square wave (max and min values equal)
the harmonic content will be all the odd-numbered harmonics in decreasing volume which gives the sound a hollow
or 'woody' timbre. The width of the pulse can also be altered by the [PULSE WIDTH] knob to make the sound
thinner.
When the [SHIFT] function is selected (SHIFT LED Flashing) this control sets the amount of oscillator 2 pitch
offset. This detune setting is calibrated in semitones with the eight indicators labelled [OSC 2 SEMITONE OFFSET]
showing the value, as in the following example:
-10
WAVEFORM
PITCH MOD
(OSC 2 PITCH)
(PWM)
0
5
Oscillators
(SHIFT)
NOT selected
(SHIFT LED Off) this control sets the selected oscillator's waveform.
) the waveform will be shaped like a SAWTOOTH. This waveform contains
Example:
Oscillator 2 pitch offset =
12 semitones (1 octave)
Press once
before changing
the setting
0
0
- 2
+10
Min
Max
Semitones
PULSE WIDTH
DETUNE
7
12
16
17
19
24
OSC 2 SEMITONE OFFSET
Oscillator 1
Oscillator2
,
,
WAVEFORM
(OSC 2 PITCH)
0 0
5
7
12
OSC 2 SEMITONE OFFSET
Oscillators
(SHIFT)
7

OPERATION

OPERATION
+ 2
Semitones
16
17
19
24
OWNERS MANUAL

Advertisement

Table of Contents
loading

Table of Contents