Front Panel Features; Part Select - Red Sound DarkStar Owner's Manual

8 voice polyphonic synthesizer
Table of Contents

Advertisement

FRONT PANEL FEATURES

1.
OSCILLATORS:
This section features [WAVEFORM], [PITCH MOD], [PULSE WIDTH] and [DETUNE] controls
for each oscillator. The large [OSCILLATOR] button switches between oscillators 1 & 2. The [SHIFT] button is used
to access the [OSC 2 PITCH] and [PWM] controls in the oscillator sub-menu.
2.
ENVELOPES:
This section features [ATTACK], [DECAY], [SUSTAIN] and [RELEASE] controls for each
envelope. The large [ENVELOPE] button switches between envelopes 1 & 2. The [SHIFT] button is used to access
the [VELOCITY] control in the envelope sub-menu.
3.
LFO'S:
This section features [SPEED], [DELAY] and [SHAPE] controls for each LFO. The large [LFO] button
switches between LFO 1 & 2. The [SHIFT] button is used to access the [MIDI CLOCK] control in the LFO sub-
menu.
4.
FILTER:
This section features [FREQUENCY], [RESONANCE] and [ENV MOD] controls for the filter. The large
[FILTER] button switches the filter on and off. The [SHIFT] button is used to access the [FILTER TYPE], [RES MOD]
and [LFO 2 MOD] controls in the oscillator sub-menu.
5.

PART SELECT:

These buttons are used to select the 5 Multitimbral 'PARTS'. You can create and store 5 totally
different sounds in each program.
6.
MENU:
This section features 8 menu buttons and a 4-way keypad. The MENU buttons are used to select
additional parameters for editing whilst the [EDIT] keypad is used to scroll up and down the menu and change the
values.
7.
AUDITION:
This button can be used to trigger the currently selected PART.
8.
PROGRAM:
This section features the [PROGRAM] and [BANK] buttons which are used to select the 8 banks of
8 programs (total programs = 64).
9.
PART OUTPUT:
This button is used to access the [LEVEL], [PANNING], [TREMOLO] and [PORTAMENTO]
parameters for each individual PART.
10.
PARAMETER/VALUE DISPLAY:
information and edit values.
11.
MIXER:
The joystick mixer adjusts the balance between OSCILLATORS 1 and 2 (or external input) and also
sets the amount of RING MODULATION.
12.
UTILITY:
This button is used to access the SYSTEM EXCLUSIVE utility parameters.
FRONT PANEL FEATURES
FRONT PANEL FEATURES
This 4-digit LED display shows bank/program numbers, parameter
3
OWNERS MANUAL

Advertisement

Table of Contents
loading

Table of Contents