Red Sound DarkStar Owner's Manual page 25

VALUE
MENU
UP
MENU
DOWN
VALUE
EDIT
The indicator in the [PORTA/TRIGGER] button will light and the main display will now alternate between the first
function and its current value, as shown below:
Function =
Auto-glide
RANGE = OFF and ON:
Press the [VALUE+]
and [VALUE -] buttons
to change the setting
OTHER MENU FUNCTIONS
MODULATION
The MODULATION function is also contained in the [MENU] section. These settings determine the amount of depth
for the MODULATION WHEEL and AFTER TOUCH MIDI controllers.
To access these settings, press the MENU button labelled [MODULATION], as shown in the following example:
VALUE
MENU
UP
MENU
DOWN
VALUE
EDIT
The indicator in the [MODULATION] button will light and the main display will now alternate between the first
function and its current value, as shown below:
Function =
Mod wheel
pitch modulation
There are four functions in the MODULATION menu as follows:
1. Modulation Wheel - Pitch Mod Depth:
be applied when the Modulation Wheel is used. RANGE = +7 to -7.
or 2 then the mod wheel will affect the amount of pitch envelope modulation.
2. Modulation Wheel - Filter Mod Depth:
be applied when the Modulation Wheel is used. RANGE = +7 to -7
OSCILLATORS FILTER OUTPUT
BANK PROG
PARAMETER
VALUE
VALUE
MENU
UP
MENU
DOWN
VALUE
EDIT OSCILLATORS
OSCILLATORS FILTER OUTPUT
BANK PROG
PARAMETER
VALUE
This function allows you to set the amount of pitch modulation that will
This function allows you to set the amount of filter modulation that will
LFO PART
MENU
BANK
Display alternates
between
PARAMETER
BANK
PARAMETER
LFO PART
MENU
BANK
Display alternates
between
PARAMETER
NOTE: if pitch mod source is set to envelope 1
25
OPERATION OPERATION
PORTA/TRIGGER MIDI MODULATION
PROG
Setting = OFF
VALUE
PROG
New setting = Auto-glide ON
VALUE
PORTA/TRIGGER MIDI MODULATION
PROG
Setting = 0
VALUE
OWNERS MANUAL