Red Sound DarkStar Owner's Manual page 27

PROGRAMS
This feature allows you to store all the DARKSTAR settings in memory for instant recall of your favourite sounds.
The position of every knob, switch and even the joystick position can be memorised in 64 user definable program
memories.
The [MENU] buttons are used to recall, compare and store the programs. To enter program mode, press
down the [PROGRAM] button (indicator ON), as in the following example:
NOTE: The functions within program mode can only be accessed whilst the [PROGRAM] button is held down. The
labelling above each button designates the program number from 1 to 8.
RECALL: To recall a program, press any of the [PROG] buttons whilst holding down the [PROGRAM] button, as in
the following example:
1 2
The main display will indicate the new setting, as shown in the following example:
DARKSTAR features a total of 64 programs that are grouped into 8 banks of 8 programs. To access the other 7
BANKS, press the [BANK] button
number, as shown in the following example:
1 2
As soon as the numbered button is pressed the new BANK will be recalled. The indicators for the [BANK] button
and selected BANK number button (example= 7) will go out and the last selected PROGRAM in that BANK will be
automatically recalled. The main display will indicate the new setting, as shown in the following example:
EDITING: To edit the selected program simply adjust the controls. When the first control or switch is moved, the
[EDIT] indicators (and the selected program button indicator) will start to flash to indicate 'EDIT' mode, as shown in
the following example:
BANK
PROG
3 4 5
BANK
PARAMETER
(whilst holding down the [PROGRAM] button)
PROG
3 4 5
BANK
PARAMETER
To access Program Mode, press & hold down
PROGRAM
6 7
PROG
Bank 1
Program 2
VALUE
6 7
3. Press Once
PROG
Bank 7
Program 3 (last selected in that BANK)
VALUE
27
OPERATION OPERATION
Press & hold down
8
BANK
PROGRAM
and then press the required BANK
1. Press & hold down
8
BANK
PROGRAM
2. Press Once
OWNERS MANUAL
and hold