Table of Contents
Advertisement
Operation
PROGRAMS - Selecting, editing and saving sounds
This section allows you to store all the DARKSTAR XP2 settings in memory for instant recall of your favourite
sounds. The position of every control knob, switch and even the joystick can be memorised in 64 user definable
program memory locations.
SELECTING PROGRAMS:
following example:
PARAMETER
1
Display shows current PROGRAM number
3
EDITING:
To edit the selected program simply adjust any of the front panel controls. When the first control or switch
is moved, the [EDIT] indicator will start to flash to indicate 'EDIT' mode, as shown in the following example:
If you
don't
want to keep the parameter changes made during editing, simply select another program.
COMPARE:
To hear the ORIGINAL settings of the selected program (before it was edited), press the EDIT -
[COMP] button once, as shown below:
VALUE
COMP
MENU
save
VALUE
EDIT
You can switch from 'Edit' to 'Compare' modes as often as you like, simply press the [COMP] button again to jump
from one mode to the other.
DARKSTAR XP2 - Poly Synth
Use the [VOICE/PROGRAM] jog dial to select programs from memory, as shown in the
VALUE
PARAMETER
VALUE
Display flashes 'PL' to indicate
PROGRAM LOADING
Press the compare [COMP]
button to hear the original
sound
[-/dwn]
2
Rotate clockwise or anti-clockwise to change PROGRAM
PARAMETER
VALUE
...then 'P 7' as the new
PROGRAM is loaded in
PARAMETER
Flashes to indicate program EDIT mode
VALUE
EDIT
PARAMETER
Display changes to 'C'
to indicate COMPARE mode
8
[+/up]
VOICE/
PROGRAM
VALUE
Advertisement
Table of Contents
