Table of Contents
Advertisement
With this first menu function selected the main display will alternate as follows:
Function =
Polyphony
RANGE = 0 to 8 notes/voices
Use the menu [EDIT - VALUE + and VALUE -] buttons to change the setting as follows:
Press the [VALUE+]
and [VALUE -] buttons
to change the setting
With all 8 voices assigned there will be no further allocation allowed.
e.g. if PART 1 = 3 voices, PART 2 = 1 voice and PART 3 = 4 voices you will be unable to set any further voices for
PARTS 4 and 5. If you wish to create an additional PART, go back and lower the voice allocation for the existing
PARTS or setup another PROGRAM.
2: KEY TRANSPOSE
This function allows you to change the musical key of the selected PART by moving it up or down, in single
semitone steps to a maximum of +/- 24 notes (2 octaves). With the second menu function selected the main display
will alternate as follows:
Function =
Key Transpose
RANGE = 0 to +24 semitones, 0 to -24 semitones
Use the menu [EDIT - VALUE + and VALUE -] buttons to change the setting as follows:
Press the [VALUE+]
and [VALUE -] buttons
to change the setting
3: NOTE RANGE - LOW
This function allows you to set the LOW note range for the selected PART. By allocating groups of notes to each
PART you can play up to five different sounds simultaneously on a single keyboard using just one MIDI channel.
With the third menu function selected the main display will alternate as follows:
Function =
Note Range LOW
RANGE = 0 to 100 notes (limited by setting of NOTE RANGE - HIGH e.g. the highest LOW NOTE value will be
determined by the note value set in NOTE RANGE - HIGH) - see next section.
BANK
PROG
Display alternates
PARAMETER
VALUE
VALUE
MENU
UP
MENU
DOWN
VALUE
EDIT
OSCILLATORS
BANK
PROG
Display alternates
PARAMETER
VALUE
VALUE
MENU
UP
MENU
DOWN
VALUE
EDIT
OSCILLATORS
BANK
PROG
Display alternates
PARAMETER
VALUE
BANK
between
PARAMETER
VALUE
BANK
PARAMETER
VALUE
BANK
between
PARAMETER
VALUE
BANK
PARAMETER
VALUE
BANK
between
PARAMETER
VALUE
19
OPERATION
OPERATION
PROG
Setting = 6 voices
PROG
New setting = 2 voices
PROG
Setting = 0 (no transposition)
PROG
New setting = - 12
(transposed down 1 octave)
PROG
Setting = MIDI note
value 60 (C3)
OWNERS MANUAL
Advertisement
Table of Contents
