Pairing And Connecting With A Bluetooth Device - Sony WH-CH710N Help Manual

Help Guide
Wireless Noise Canceling Stereo Headset
WH-CH710N

Pairing and connecting with a Bluetooth device

The operation to register the device that you wish to connect to is called "pairing". First, pair a device to use it with the
headset for the first time.
Before starting the operation, make sure of the following:
The Bluetooth device is placed within 1 m (3 feet) of the headset.
The headset is charged sufficiently.
The operating instructions of the Bluetooth device is in hand.
Enter pairing mode on this headset.
1
Turn on the headset when you pair the headset with a device for the first time after you bought it or after you
initialized the headset (the headset has no pairing information). The headset enters pairing mode automatically. In
this case, proceed to step 2.
When you pair a second or subsequent device (the headset has pairing information for other devices), press and
hold the (power) button for about 7 seconds.
Check that the indicator (blue) repeatedly flashes twice in a row. You will hear the voice guidance say, "Bluetooth
pairing".
Perform the pairing procedure on the Bluetooth device to search for this headset.
2
[WH-CH710N] will be displayed on the list of detected devices on the screen of the Bluetooth device.
If it is not displayed, repeat from step 1.
Select [WH-CH710N] displayed on the screen of the Bluetooth device for pairing.
3
If Passkey (*) input is required, input "0000".
* A Passkey may be called "Passcode", "PIN code", "PIN number", or "Password".
Make the Bluetooth connection from the Bluetooth device.
4
55