Sony WH-CH710N Help Manual page 28

Wireless noise canceling stereo headset

Hide thumbs Also See for WH-CH710N:

Table of Contents

When the headset is connected with the smartphone, the indicator (blue) starts flashing slowly. You will hear the

voice guidance say, "Bluetooth connected".

To disconnect, touch the smartphone again with the headset. You will hear the voice guidance say, "Bluetooth

disconnected".

To connect a paired smartphone, perform step 3.

Unlock the screen of the smartphone if it is locked.

Hint

The operation above is an example. For more details, refer to the operating instructions supplied with the Android smartphone.

If you cannot connect the headset, try the following.

Unlock the screen of the smartphone if it is locked, and move the smartphone slowly over the N-Mark.

If the smartphone is in a case, remove the case.

Check that the Bluetooth function of the smartphone is enabled.

If you touch an NFC-compatible smartphone connected to another NFC-compatible device with the headset, the smartphone

terminates the Bluetooth connection with any current devices, and connects to the headset via one-touch (NFC) (One-touch

connection switching).

Note

When 2 Bluetooth devices have already connected to the WH-CH710N in a multipoint connection, and one is used for music

playback (A2DP connection) and the other is used for calls (HFP/HSP connection), another smartphone cannot connect via

Bluetooth connection with one-touch (NFC) even if you touch the smartphone with the WH-CH710N. In this case, disconnect one

of the already connected Bluetooth devices and touch the smartphone you want to connect with WH-CH710N again.

Table of Contents