Pairing And Connecting With Other Bluetooth Devices - Sony MDR-ZX780DC Help Manual

Help Guide
Wireless Noise Cancelling Stereo Headset
MDR-ZX780DC

Pairing and connecting with other BLUETOOTH devices

Pairing is the process required to create a link between BLUETOOTH devices to allow wireless connection.
You must pair a device with the headset to be able to make a BLUETOOTH connection for the first time.
Before you start pairing operation, make sure that:
The BLUETOOTH device is placed within 1 m (3 feet) of the headset.
The headset is charged sufficiently.
The operating instructions of the BLUETOOTH device is on hand.
Enter pairing mode on this headset.
1
When you pair the headset with a device for the first time after you bought it, or after you initialized the headset (the headset
has no pairing information), press and hold the POWER button for about 2 seconds when the headset is turned off. The
headset enters pairing mode automatically.
When you pair a 2nd or subsequent device (the headset has pairing information for other devices), press and hold the
POWER button for about 7 seconds.
Make sure that the indicator flashes blue and red alternately after you release the button.
Perform the pairing procedure on the BLUETOOTH device to search for this headset.
2
[MDR-ZX780DC] will be displayed on the list of detected devices on the screen of the BLUETOOTH device. If not displayed,
repeat from step 1.
Select [MDR-ZX780DC].
3
33