Table of Contents
Advertisement
Final Assembly
1. You may optionally choose to apply a tiny drop of Loctite to the screws that hold the circuit
boards in place – both top and bottom. This will ensure that the screws will not work loose
over time or during shipment. Screws and nuts that have star lock washers do not need
Loctite.
————————————————————————————
2. Position the top panel on the top of the unit and secure with nine 6-32 x ¼" Phillips head
screws. Tighten these screws.
————————————————————————————
3. Install the knobs. Align the knobs and tighten the setscrews using a 1.5mm. hex wrench.
————————————————————————————
Congratulations! You have finished the assembly and installation.
Enjoy the music and be aware that the character and quality of the sound will improve with time.
The first 100 hours are most noticeable so hold off making evaluations until after that.
58
Advertisement
Table of Contents
