Table of Contents
Advertisement
Mount the 8V Regulator for the USB adapter.
Skip this step if you do not have a USB adapter
♪
16. Place the 8V Regulator for the USB Adapter in its location, in line with the transformer, but
close to the rear of the panel. Orient the board such that the AC Input is closest to the edge of
the panel. Do not secure the board yet.
17. Dress the grey twisted pair that is connected to transformer pins B3 and B8 along the edge of
the panel to the Regulator. Connect that grey twisted pair to the AC Input pads.
18. Secure the board with four 6-32 x ¼" screws.
————————————————————————————
28
Advertisement
Table of Contents
