Timer Recording With The Vcr Plus+ Programming System - Philips VR960BPH Owner's Manual

Timer Recording with the VCR Plus+ Programming System (cont'd) 39
5
Press the OK/STATUS button. If the VCR PLUS+ and
CABLE/TV channel lists appear on the screen, the CABLE/TV
channel has not been set for the VCR PLUS+ channel of the
program you have set in step 4. Press the Number buttons to enter
the CABLE/TV channel number from your list on page 36, then
press the OK/STATUS button.
6
• If you want to record the program one time only, go to
step 7. You also may press the Number 8/DAILY or
Number 9/WEEKLY button repeatedly to select a ONE TIME
PROGRAM.
• If you want to record the program daily, press the
Number 8/DAILY button so that DAILY PROGRAM
appears at the top of the screen. The VCR will record a
program every day from Monday through Friday, starting at the
same time and recording for the same length of time.
• If you want to record the program every week, press the
Number 9/WEEKLY button so that WEEKLY PROGRAM
appears at the top of the screen. The VCR will record a
program on the same day, at the same time, for the same length of
time every week.
DAILY PROGRAM (MON-FRI)
PROGRAM 1
CHANNEL +/– 12 CABLE/TV
START +/– 08:00 PM
STOP +/– 10:00 PM
REC SPEED SLP
DATE +/– 06/21/00
WEDNESDAY
DAILY: 8 WEEKLY: 9
CONFIRM: OK END: TIMER
7
Press the ALT/SPEED button to select the tape speed. The
selected tape speed, SP or SLP, will appear beside REC SPEED.
8
Press the OK/STATUS or TIMER button. PROGRAM WAS
COMPLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING
should appear on the screen. (If PROGRAM NOT COMPLETED
appears, begin again from step 1.) After five seconds, the on-screen
display will disappear.
9
Press the POWER button to turn off the VCR. The VCR
must be turned off for a timer recording to take place. The
r
light will appear on the display panel. The
Cassette-Inside light will flash when you turn off the VCR if there is
not a tape in the VCR.
Turn off the VCR for a timer recording! Put a tape
in the VCR. Leave the Cable Box/DBS on.
r
light and the
CBL / DBS TV
VCR/TV POWER SMARTPICTURE
9
QUICK PROGRAMMING
+ +
1 2
START STOP
4 - 5 -
DAILY WEEKLY
7 8
7
SPEED DBS
0
ALT CLEAR
STILL/SLOW
-
REW
PLAY
STOP
VOL
OK/STATUS
MENU
TIMER
TURBO AUDIO/ SKIP
SEARCH
TIMER MUTE
EJECT
Helpful Hints
• Do not select DAILY at step 6 if the
VCR Plus+ recording you chose is on
a Saturday or Sunday. The recording
will not occur, even though the VCR
may accept the way you programmed
the recording.
• To exit the VCR Plus+ programming
system at any step, press the TIMER
button.
• If the timer recording you just
programmed overlaps another timer
recording, PROGRAM NOT
COMPLETED/PROGRAM OVERLAP
will appear. Details are on page 46.
• If you forget to turn off the VCR,
PLEASE TURN OFF VCR FOR TIMER
RECORDING flashes on your TV
screen two minutes before a timer
recording is set to begin. To remove
the message, press the CLEAR button.
• To check your timer recordings, see
page 45.
VCR
3
DATE
6
6
9
+
FF
5
CH
8
REC END
SEARCH
/OTR
REC REC