Timer Recording With The Vcr Plus+ Programming System - Philips VRZ362AT99 Owner's Manual

VRZ362comb.QX33 4/7/99 8:27 PM

42 Timer Recording With the VCR Plus+ Programming System

Follow these steps to set a timer recording with the PlusCode
programming numbers in your TV guide. Before you begin:
Set up the channels at the VCR (page 12).
Set up the VCR Plus+ and Cable/TV channel numbers (pages 40
- 41).
Set the clock (pages 15 - 18).
Put a tape in the VCR.
Turn on the VCR power. The VCR light should appear on the
display panel. If it does not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.
1
Press the VCR button.
2
Press the VCR PLUS+ /ENTER button.
VCR PLUS+ PROG.
PLUS CODE : – – – – – – – –
TO END PUSH EXIT
3
Press the Number buttons to enter the PlusCode pro-
gramming number of the program you wish to record.
Then, press the VCR PLUS+ /ENTER button.
VCR PLUS+ PROG.
PLUS CODE : 13285 – – –
TO SET PUSH VCR+
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
4
Press the PLAY/o button or the STOP/p button to select
a ONCE, DAILY, OR WEEKLY recording. Then, press the
F.FWD/B button.
ONCE: The VCR will record a TV program on any day you
choose, up to 12 months away.
DAILY: The VCR will record the same channel every day from
Monday to Friday – starting at the same time and recording for
the same length of time.
WEEKLY: The VCR will record the same channel on the same
day, at the same time, and for the same length of time every
week.
VCR PLUS+ PROG.
ONCE
DAILY
WEEKLY
SELECT op CHOOSE B
TO END PUSH EXIT
Page 42
POWER EJECT
VCR/TV SPEED MEMORY
REC/OTR PAUSE/STILL
PLAY
REW F.FWD
STOP
STATUS/EXIT
1 2 3
CH.
4 5 6
7 8 9
0
+100
MUTE
1
VOL.
VCR TV CBL/DBS
VCR PLUS+
2 /ENTER
VAR.SLOW SLOW
TRACKING
F.ADV X2 PLAY
QUICK TIME INDEX REC END SKIP
SEARCH
Helpful Hints
• CODE ERROR may flash on-screen
after step 3 if you enter an incorrect
number (for example, one that is too
short). The previous screen will
appear. Enter the correct PlusCode
programming number.
• If the VCR PLUS+ CROSS REF. MAP
reappears after step 3, the VCR
PLUS + channel number for the
recording you entered was higher
than 99. In this case, enter the cor-
rect CABLE/TV channel in the map.
Then, press the MENU button and
continue from step 4.
• If CLASH flashes on-screen at step
3, the timer recording you just pro-
grammed and another timer record-
ing overlap. The current timer record-
ing will not occur.
• If you select DAILY at step 4,
ERROR may flash on-screen if the
program you want to record is
broadcast on a Saturday or Sunday.
4
3