Cisco 2500 Series Installation And Configuration Manual page 77

Cabling
V.35
Figure C-9 shows the V.35 cable assembly.
pinouts. Arrows indicate signal direction: --> indicates DTE to DCE, and <-- indicates DCE to DTE.
Figure C-9: V.35 Cable Assembly
Table C-11: V.35 DTE Cable Pinouts (DB-60 to 34-Pin) (Continued)
60 Pin Signal
J1-49 MODE_1
J1-48 GND
J1-50 MODE_0
J1-51 GND
J1-52 MODE_DCE
J1-53 TxC/NIL
J1-54 RxC_TxCE
J1-55 RxD/TxD
J1-56 GND
J1-46 Shield_GND Single
J1-45 Circuit_GND
Shield -
J1-42 RTS/CTS
Shield -
J1-35 CTS/RTS
Shield -
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2500/2520/2520_23/c2520cab.htm (13 of 17) [10/27/2000 3:08:10 PM]
Description Direction 34 Pin Signal
Shorting group -
Shorting group -
Shorting group -
-
Twisted pair no. 12 -
-
Twisted pair no. 9 -->
-
Twisted pair no. 8 <--
-
Table C-11 lists the DTE pinouts.
- -
- -
- -
J2-A Frame GND
J2-B Circuit GND
Shield -
J2-C RTS
Shield -
J2-D CTS
Shield -
Table C-12 lists the DCE