Table of Contents
Advertisement
Grounded tools require a three wire extension cord. Double Insulated tools
1.
can use either a two or three wire extension cord.
2.
As the distance from the supply outlet increases, you must use a heavier gauge
extension cord. Using extension cords with inadequately sized wire causes a
serious drop in voltage, resulting in loss of power and possible tool damage.
(See Figure D.)
3.
The smaller the gauge number of the wire, the greater the capacity of the cord.
For example, a 14 gauge cord can carry a higher current than a 16 gauge cord.
(See Figure D.)
4.
When using more than one extension cord to make up the total length, make
sure each cord contains at least the minimum wire size required.
(See Figure D.)
5.
If you are using one extension cord for more than one tool, add the nameplate
amperes and use the sum to determine the required minimum cord size.
(See Figure D.)
6.
If you are using an extension cord outdoors, make sure it is marked with the
suffix "W-A" ("W" in Canada) to indicate it is acceptable for outdoor use.
7.
Make sure your extension cord is properly wired and in good electrical condition.
Always replace a damaged extension cord or have it repaired by a qualified
electrician before using it.
8.
Protect your extension cords from sharp objects, excessive heat, and damp or
wet areas.
RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS
NAMEPLATE
AMPERES
(At Full Load)
0 – 2.0
2.1 – 3.4
3.5 – 5.0
5.1 – 7.0
7.1 – 12.0
12.1 – 16.0
16.1 – 20.0
SKU 93455
For technical questions, please call 1-800-444-3353.
EXTENSION CORDS
(120 VOLT)
EXTENSION CORD LENGTH
25
50
Feet
Feet
18
18
18
18
18
18
18
16
18
14
14
12
12
10
* Based on limiting the line voltage drop
to five volts at 150% of the rated amperes.
75
100
Feet
Feet
18
18
18
16
16
14
14
12
12
10
10
-
-
-
150
Feet
16
14
12
12
-
-
-
FIGURE D
Page 8
Advertisement
Table of Contents
