Table of Contents
Advertisement
GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS
1.
Tools marked with "Grounding Required" have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If
the tool should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user, reducing the risk of electric
shock. (See Figure B.)
2.
The grounding prong in the plug is connected through the green wire inside the
cord to the grounding system in the tool. The green wire in the cord must be the
only wire connected to the tool's grounding system and must never be attached
to an electrically "live" terminal. (See Figure B.)
3.
Your tool must be plugged into an appropriate outlet, properly installed and
grounded in accordance with all codes and ordinances. The plug and outlet
should look like those in the following illustration. (See Figure B.)
THIS PRODUCT
DOES NOT
USE A
3-PRONG
ELECTRICAL
PLUG
DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS
4.
Tools marked "Double Insulated" do not require grounding. They have a special
double insulation system which satisfies OSHA requirements and complies with
the applicable standards of Underwriters Laboratories, Inc., the Canadian
Standard Association, and the National Electrical Code. (See Figure C.)
5.
Double insulated tools may be used in either of the 120 volt outlets shown in the
following illustration. (See Figure C.)
THIS PRODUCT
USES A
2-PRONG
ELECTRICAL
PLUG
SKU 93455
For technical questions, please call 1-800-444-3353.
120 VOLT,
GROUNDED,
ELECTRICAL OUTLET
FIGURE B
120 VOLT,
GROUNDED,
ELECTRICAL OUTLETS
FIGURE C
Page 7
Advertisement
Table of Contents
