Summary of Contents for Harbor Freight Tools One Stop Gardens 93455
Page 1
Copyright 2005 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions, please call 1-800-444-3353.
grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.
SPECIFIC SAFETY RULES Maintain labels and nameplates on the Fountain. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replace- ment. Wear ANSI approved safety impact eye goggles and heavy duty work gloves when assembling the Fountain.
Page 5
Maintain a safe environment. Keep the area well lit. Make sure there is adequate surrounding space. Always keep the area free of obstructions, grease, oil, trash, and other debris. Do not use an electrically powered product in areas near flammable chemicals, dusts, and vapors. Carefully inspect the condition of the Fountain before use, and check the Fountain periodically during use.
Page 6
WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. WARNING! The warnings and cautions discussed in this manual cannot cover all possible conditions and situations that may occur.
GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock.
EXTENSION CORDS Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage.
Page 9
When unpacking, check to make sure all the parts shown on the Parts List on page 12 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
HOSE (2) 2” MINIMUM WATER LEVEL FOR BEST RESULTS, CONNECTOR TUBE (5) COMPLETELY SUBMERGE THE WATER PUMP. WATER PUMP (4) FIGURE F Operating Instructions: CAUTION: Make sure your hands and feet as well as the Transformer (8), are dry, before plugging in the Transformer.
Before each use, inspect the general condition of the Fountain. Check for cracked or broken parts, damaged electrical wiring, and any other condition that may affect safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment. To clean the Water Pump Impeller: A clogged or dirty Pump Impeller (12) will greatly reduce performance of the Fountain.
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.