Safety; General Points; Stopping The Machine - GIRBAU FL Series Technical Manual

3 SAFETY

3.1 GENERAL POINTS

Note: Read and comply with chapter 1 Warning.
Machine EMERGENCY STOP:
- Press the Emergency stop button:
When there is an emergency stop, all movements are stopped.
The machine must be started up again by the operator responsible. He/she will
press the reset button after making sure there is no further danger.
Resetting is authorised if and only if:
- No emergency stop button is activated,
- All grille sensors are activated,
- All thermal protectors are engaged,
- The ironer safety sensor is engaged.

3.2 STOPPING THE MACHINE

Set the selector to OFF.
- Close the air intake valve and padlock it.
FL0610A
Padlock not
provided
Padlock not provided
38