On-Screen Status Displays 25 - Philips VR621CAT Owner's Manual

4hd/hi fi/led clk/vid cassette recorder

Hide thumbs Also See for VR621CAT:

Hookups and settings (10 pages)

Specification sheet (2 pages)

Table Of Contents

Table of Contents

A status display will appear when you press the STATUS/EXIT but-

ton or certain function buttons. The contents of the status display

will vary. To choose the status display mode, follow the steps below.

If you select STATUS ON, then select COUNTER ONLY

ON:

Whenever you press the STOP/p button or the PLAY/o button,

the status display will appear for five seconds. After five seconds,

only the counter will remain on the screen. You must press the

STATUS/EXIT button to remove it. Portions of the status display

also may appear when you press other function buttons.

If you select STATUS ON, then select COUNTER ONLY

OFF:

Whenever you press the STOP/p button or the PLAY/o button,

the status display will appear for five seconds. Portions of the sta-

tus display also may appear when you press other function but-

tons.

If you select STATUS OFF:

The status display will not appear when you press function but-

tons. You must press the STATUS/EXIT button to see the status

display.

Press the VCR button, then press the MENU button.

Press the PLAY/o button or the STOP/p button to select

VCR SET UP, then press the F.FWD/B button.

Press the PLAY/o button or the STOP/p button to select

ON SCREEN MODE, then press the F.FWD/B button.

Press the PLAY/o button or the STOP/p button to select

STATUS, then press the F.FWD/B button so that OFF

(or ON) appears beside STATUS.

SELECT op CHOOSE B

STATUS

[ON]

COUNTER ONLY

[OFF]

TO END PUSH EXIT

If you set STATUS to OFF, go to step 6. If you set STA-

TUS to ON, press the PLAY/o button or the STOP/p

button to select COUNTER ONLY, then press the

F.FWD/B button so that OFF (or ON) appears beside it.

Press the STATUS/EXIT button.