Playing 29 - Philips VR621CAT Owner's Manual

Read and follow the steps below to play a tape.
1
Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape in the VCR. The PWR., VCR, and Cassette-Inside
lights will appear on the display panel. If the tape's record tab has
been removed, playback will start automatically.
3
If playback does not start automatically, press the VCR
button, then press the PLAY/o button.
4
Press the STOP/p button to stop playback.
5
Press the REW(ind)/{ button to rewind the tape.
6
Press the EJECT button to remove the tape.
S-VHS Quasi Play Back (SQPB)
This unit has a SQPB function that allows you to view a tape
recorded in S-VHS format. A tape recorded in S-VHS format will
play the same as a tape recorded in normal format. This unit auto-
matically detects whether the tape is recorded in S-VHS format or
in normal format.
When you play a tape recorded in S-VHS format on this unit, you
can not get the high resolution that would be available on an S-
VHS VCR. Noise lines (black and white streaks) may appear on
the picture.

Playing 29

1
Turn on the TV.
2
Insert a tape in the VCR.
6
EJECT
POWER
MENU STATUS/EXIT
1 2
4 5
7 8
MEMORY
0
5
REC PAUSE
/OTR
PLAY
REW F.FWD
4
STOP
CH.
MUTE
VCR TV CBL/DBS
VCR/TV SPEED TIME SEARCH
ENTER SLOW
Helpful Hints
• If the tape you want to play is
already in the VCR, make sure the
VCR power is on and the VCR is in
VCR position. (The VCR light will
appear on the display panel. If it
does not, press the VCR/TV button
once.) Press the VCR button, then
press the PLAY/o button.
• Other playback options and features
are on pages 38-45.
• If REPEAT PLAY is set to ON, play-
back will begin automatically when
you insert a tape, even when the
record tab is intact. (However, play-
back will not begin if the VCR power
is off and a timer recording is set.)
CLEAR
3
6
9
ALT.CH
3
/STILL
VOL.