Setting The Clock 15 - Philips VR621CAT Owner's Manual

There are two ways to set the clock. With manual clock setting,
you tell the VCR the current time. With automatic clock setting,
the VCR gets the current time from your local PBS station. It
keeps track of the time by constantly referring to the time broad-
casted by your PBS station.
If you are using a Cable Box or Direct Broadcast System,
you must set the clock manually.
Follow the instructions under either manual clock setting (below)
or automatic clock setting (page 17) to set the VCR's clock.
Before you begin, make sure:
The VCR is hooked up and turned on, and channels are pro-
grammed into the VCR's memory (see pages six-12).
The VCR is in VCR position. The VCR light will appear on the
display panel. If it does not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.
Manual Clock Setting
1
Press the VCR button.
2
Press the MENU button.
SELECT op CHOOSE B
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
3
Press the PLAY/o button or the STOP/p button to select
SET CLOCK, then press the F.FWD/B button.
SET CLOCK
AUTO CLOCK [ON]
SET MANUAL CLOCK
DAYLIGHT SVG TIME [ON]
SET TIME ZONE
(AUTO)
TO CONTINUE PUSH MENU
SELECT op CHOOSE B
TO END PUSH EXIT
4
Press the PLAY/o button or the STOP/p button to select
SET MANUAL CLOCK, then press the F.FWD/B button.
TIME – – : – –
DATE – – / – – / – –
TO END PUSH EXIT

Setting the Clock 15

EJECT
POWER
2
MENU CLEAR
STATUS/EXIT
1 2
4 5
7 8
MEMORY ALT.CH
0
REC PAUSE
/OTR /STILL
PLAY
REW
F.FWD
STOP
CH.
MUTE
1
VCR TV CBL/DBS
VCR/TV SPEED TIME SEARCH
ENTER SLOW
Helpful Hints
• To display the time on the TV
screen, press the STATUS/EXIT but-
ton. Details are on page 25.
• Power failures may erase the clock
setting. If this happens, reset the
clock.
• Until the clock is set, - : - - may
appear on the VCR display panel.
3-4
3
6
9
VOL.