Table of Contents
Advertisement
Automatic Clock Setting
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press the PLAY/o button or the STOP/p button to select
SET CLOCK, then press the F.FWD/B button.
3
If OFF appears to the right of AUTO CLOCK, press the
F.FWD/B button to select ON. Then, press the MENU
button. Or, if ON appears to the right of AUTO CLOCK,
press the MENU button. Go to step 4.
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT op CHOOSE B
TO END PUSH EXIT
4
If you want the VCR to locate a local PBS station from
which to take the time, press the PLAY/o button or the
STOP/p button to select SET PBS CH. AUTO. Then
press the F.FWD/B button. When the current time appears
on the screen, you're finished. Press the STATUS/EXIT button.
Or, you may be prompted to turn off the VCR. Turn off the
VCR power, and leave it off for several minutes. When the cur-
rent time appears on the VCR display panel, the clock is set. You
may turn on the VCR again.
If you want to tell the VCR the PBS station from which
to take the time, press the PLAY/o button or the
STOP/p button to select SET PBS CH. MANUAL. Press
the F.FWD/B button, then use the Number buttons to
enter the channel number of the desired PBS station.
When the current time appears on the screen, you're finished.
Press the STATUS/EXIT button.
NOTE: CANNOT FIND PBS CLOCK DATA may flash on the screen.
Press the PLAY/o button or the STOP/p button to choose SELECT
NEW PBS CH., then press the F.FWD/B button. Use the Number
buttons to enter the channel number of another PBS station.
Or, press the PLAY/o button or the STOP/p button to select SET
PBS CH. AUTO. Press the F.FWD/B button. You will be prompted to
turn off the VCR. Turn off the VCR power, and leave it off for several
minutes. When the current time appears on the VCR display panel,
the clock is set. You may turn on the VCR again.
Setting the Clock (cont'd) 17
4
3
EJECT
MENU
1
4
7
MEMORY
REC
/OTR
REW
CH.
1
VCR
VCR/TV
Helpful Hints
• If you enter an incorrect PBS channel
number at step 4, press the CLEAR
button to erase the incorrect channel,
then enter the correct channel
number.
• If you have an antenna, you may
select channels 2-69 at step 4. If you
have a cable connection, you may
select channels 1-125.
• The VCR can not set its clock auto-
matically if it doesn't receive a chan-
nel that carries a time signal. Set the
clock manually.
• If only a few channels in your area
carry time signals, setting the clock
automatically may take several min-
utes. If nothing happens after you
wait several minutes, set the clock
manually.
• You cannot select AUTO CLOCK at
step 3 during tape playback.
2-4
POWER
STATUS/EXIT
CLEAR
2
3
5
6
8
9
ALT.CH
0
PAUSE
/STILL
PLAY
F.FWD
STOP
VOL.
MUTE
TV
CBL/DBS
SPEED TIME SEARCH
ENTER
SLOW
Advertisement
Table of Contents
