Remote Control Buttons 23 - Philips VR621CAT Owner's Manual

4hd/hi fi/led clk/vid cassette recorder

Hide thumbs Also See for VR621CAT:

Hookups and settings (10 pages)

Specification sheet (2 pages)

Table Of Contents

Table of Contents

Press to turn on or off the VCR, TV, Cable Box, or Direct Broadcast

System. (You must first press the VCR, TV, or CBL/DBS button.)

Press to access the VCR menu or some TV menus.

Press to select channels at the VCR, TV, Cable Box, or Direct Broadcast

System; use to set up VCR features (such as the clock).

At the VCR, enter channel numbers as a two-digit number for the quickest

results. For example, to select channel 6, press 0,6. If you only press the

Number 6 button, channel 6 will be selected after a brief delay. (There

also may be a brief delay when you select channels 10, 11, and 12.) If you

want to select channels 100 and above, enter channel numbers as a three-

digit number. For example, to select channel 117, press 1, 1, 7.

Enter channel numbers as a two-digit number for the quickest results. You

may only select channels 2-69. For example, to select channel 5, press 0,5.

If you only press the Number 5 button, channel 5 will be selected after a

Press to memorize a tape position at which the real-time

Press once to start a recording. Details are on page 30. Or, press

repeatedly to start a One-Touch Recording. Details are on page 32.

Press to play a tape; press to release Slow, Search, or Still mode and return

to normal playback. Details are on page 41. Press to select an item in the

Press to eliminate the sound at your TV. Press again to restore the volume.

If you mute the volume, pressing the VOL(ume)

Press to operate the VCR with the remote control.

Press to select the recording speed (SP or SLP). Details are on

During tape playback, press to view the picture in slow motion.

Press again to resume normal playback. Details are on page 41.

While recording, press to temporarily stop the recording (pause). Press a

second time to resume normal recording. Details are on page 30. You can

not pause a One-Touch Recording. During playback, press to freeze the

picture (still). Press again to resume playback. Details are on page 41.

• Press the VCR button before pressing VCR feature buttons; press the TV button before pressing TV feature buttons;

press the CBL/DBS button before pressing Cable Box/Direct Broadcast System feature buttons.

• Buttons that are shaded in the picture will glow for some time after exposure to direct light.

• Buttons with a shaded description may also operate features of your TV, Cable Box, or Direct Broadcast System.

counter was set to 0:00:00. Details are on page 39.

REC(ord)/OTR Button

VCR's menu or some TV menus.

o button also will restore

VOL(ume)

Press to adjust the volume of your TV.

Helpful Hints