Philips VR423CAT Hookups And Settings

Hookup pages
Hide thumbs Also See for VR423CAT:

Advertisement

Quick Links

Video Cassette Recorder
Hookup Pages
VR423CAT
VR623CAT

Advertisement

Table of Contents
loading

Summary of Contents for Philips VR423CAT

  • Page 1 Video Cassette Recorder Hookup Pages VR423CAT VR623CAT...
  • Page 2: Hookups Without A Cable Box/Direct Broadcast System

    Cable Box or a Direct Broadcast System, please see pages eight-nine. If you have a Stereo TV, please see page 10. After you hook up the VCR, go to page 11 to turn on the VCR. (The VR623CAT is illustrated here. The VR423CAT has single AUDIO IN/OUT jacks.) Disconnect the antenna or cable from your TV.
  • Page 3 Connect the supplied black RF coaxial cable to the OUT Jack on the back of the VCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on type (supplied) or screw-on type of coaxial cable, whichever you prefer.)
  • Page 4: Hookups With A Cable Box/Direct Broadcast System

    You may not program channels at the VCR. You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable Box/DBS output channel (channel 03 or 04). Set the CH3/CH4 switch on the back of the VCR to the same channel. Set your Cable Box/DBS to the channel you want to record.
  • Page 5: Recording One Channel/Watching Another

    Put the Cable Box/DBS on the same channel as the VCR’s CH3/CH4 switch. Set the TV to the Cable Box/DBS output channel (03 or 04). Then, with the VCR in VCR position (the VCR light will appear on the display panel), use the CH(annel) o/p buttons to select the channel you want to record at the VCR.
  • Page 6: Hookups With A Stereo Tv

    IN Jacks on your TV. If you have the VR423CAT, connect an audio cable to the white AUDIO OUT Jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV. If your TV has Right and Left AUDIO IN Jacks, you must use a “Y”...
  • Page 7: Front Panel

    During tape playback, press to fast forward the tape while the picture stays on the screen. Details are on page 41. Press to select an item in the VCR menu or to change the setting of a menu item.
  • Page 8: Rear Panel

    (AV REAR) at the VCR. This allows you to view or hear the materials playing on the other equipment. The VR623CAT is shown here. The VR423CAT has only one AUDIO IN jack. AUDIO OUT Jack(s) Connect audio cables going to the AUDIO IN Jacks of a camcorder, another VCR, or an audio system here.
  • Page 9: Helpful Hints

    Audio and Video cables are not supplied. Make the connections shown above. VCR 1 will play your tape. Put a prerecorded tape in VCR 1. VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR light will appear on the display panel.

This manual is also suitable for:

Vr623catVr623cat99

Table of Contents