Setting The Clock 15 - Philips VRZ342AT99 Owner's Manual

VRZ342comb.QX33 4/7/99 10:06 PM
There are two ways to set the clock. With manual clock setting,
you tell the VCR the current time. With automatic clock setting,
the VCR gets the current time from your local PBS station. It
keeps track of the time by constantly referring to the time broad-
casted by your PBS station.
If you are using a Cable Box or Direct Broadcast System,
you must set the clock manually.
Follow the instructions under either manual clock setting or auto-
matic clock setting (page 17) to set the VCR's clock. Before you
begin, make sure:
The VCR is hooked up and turned on, and channels are pro-
grammed into the VCR's memory (see pages six - 12).
The VCR is in VCR position. The VCR light will appear on the
display panel. If it does not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.
Manual Clock Setting
1
Press the VCR button.
2
Press the MENU button.
SELECT op CHOOSE B
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
REMOTE LOCATOR
TO END PUSH EXIT
3
Press the PLAY/o button or the STOP/p button to select
SET CLOCK, then press the F.FWD/B button.
SET CLOCK
AUTO CLOCK [ON]
SET MANUAL CLOCK
DAYLIGHT SVG TIME [ON]
SET TIME ZONE
(AUTO)
TO CONTINUE PUSH MENU
SELECT op CHOOSE B
TO END PUSH EXIT
4
Press the PLAY/o button or the STOP/p button to select
SET MANUAL CLOCK, then press the F.FWD/B button.
TIME – – : – –
DATE – – / – – / – –
TO END PUSH EXIT
Page 15

Setting the Clock 15

3-4
POWER EJECT
VCR/TV SPEED MEMORY
REC/OTR PAUSE/STILL
PLAY
REW F.FWD
STOP
2
STATUS/EXIT
1 2 3
CH.
4 5 6
7 8 9
0
MUTE +100
VOL.
1
VCR TV CBL/DBS
VCR PLUS+
VAR.SLOW /ENTER SLOW
TRACKING F.ADV X2 PLAY
QUICK TIME INDEX REC END SKIP
SEARCH
Helpful Hints
• To display the time, press the STA-
TUS/EXIT button. A status display,
which includes the time, will appear
on the TV screen for about five sec-
onds. For details, see "On-Screen
Status Displays" on page 27.
• If you press the STATUS/EXIT but-
ton while you are setting the clock,
the TV screen will return to the pro-
gram you were watching. If this
happens, start over.
• Power failures that last for more
than one minute can cause you to
lose your clock setting if you set the
clock manually. If this happens,
reset the clock.