Figure 208 Short Anistatic Brush Installed On The Inspection Plate; Figure 209 Pin On Output Assembly For Inspection Plate - HP Indigo Press WS4000 Service Manual

HP Indigo press ws4000 Cluster 1 procedures

Figure 208 Short anistatic brush installed on the inspection plate

•3. Install the inspection plate above the Exit roller. The pins in the front and
rear of the Output assembly wall fit in the slot in the plate (see Figure 209
and Figure 210).

Figure 209 Pin on Output assembly for Inspection plate

proprietary and confidential CA293-00600, Rev 00 page 174 of 221