Figure 20 Touch Screen Control Panel - HP Indigo Press WS4000 Service Manual

HP Indigo press ws4000 Cluster 1 procedures
•3. If the Galileo software is not installed on your laptop, install it from the
"hp indigo press whs software for w3200/ws4000" CD-ROM, from file
\TOOLS\Galileo Workshop\Disk1\setup.exe.
•4. At the laptop, do the following:
a.
b.
c.
d.
•5. At the touch screen panel, remove the side panel.
DOWNLOAD
button
PROG PORT
•6. Connect the communications cable (P/N EHE-4600-51) between the touch
screen PROG PORT (Figure 20).and the serial port at the rear of the
laptop.
Note: Note the part number of the communications cable. Make sure that you use the
correct cable.
•7. At the touch screen control panel, press the DOWNLOAD button
(Figure 20). The touch screen displays Waiting for serial
download.
•8. At the laptop, click Start, Programs, Galileo, and Galileo Workshop
GWS to start the Galileo program. The Galileo Workshop window appears.
•9. Click Transfer and Download. The Download window appears.
proprietary and confidential
Copy the \SOURCE FILES\TSP folder from the CD-ROM to your
laptop's local disk.
From Windows Explorer, right-click the TSP folder that you copied and
select Properties. The Tsp Properties window appears.
Clear the Read-only check box and click OK. The Confirm Attribute
Changes window appears.
Select the Apply changes to this folder, subfolders and files radio
button and click OK.

Figure 20 Touch screen control panel

CA293-00600, Rev 00
Touch screen
control panel
page 29 of 221