Table of Contents
Advertisement
Maintenance – Running-in instructions
8.5 Running-in instructions
8.5.1 General
8.5.2 After 25 operating hours
76
The following maintenance work must be performed when running
in new machines or overhauled engines.
1.
Change the engine oil
and oil filter element" on page 86.
2.
Check the valve clearance, adjust if necessary
8.9.2 „Checking, adjusting the valve clearance" on page 84.
3.
Check engine and machine for leaks.
4.
Retighten the fastening screws on air filter, exhaust and other
attachments.
5.
Retighten the bolted connections on the machine.
Ä Chapter 8.11.3 „Servicing the V-
6.
Check the V-belt
belt" on page 96.
7.
Check the oil level in the exciter shaft housing
8.11.4 „Checking the oil level in the exciter
housing" on page 97.
BPR 70/70 D
Ä Chapter 8.9.3 „Changing engine oil
Ä Chapter
Ä Chapter
Advertisement
Table of Contents
Troubleshooting
