Changing Of Oven Lamps / Maintenance - PizzaMaster PM 351ED Instructions For Installation, Operation And Maintenance

Changing of oven lamps / Maintenance

How to remove door gasket for cleaning or
replacement.
Remove door gasket
For replacement of door gasket it is necessary to use
a screwdriver with Phillips Head.
Remove all screws on both left and right hand side
and on the side A (see image) of the oven door.
Remove door gasket.
IMPORTANT! when replacing the old gasket make
sure the old gasket is fully removed.
Installation of door gasket
Place the gasket in the gap between the door frame
and the stainless steel parts. Make sure the gasket is
left out with 8mm/0.3in as shown in the image.
Fasten gasket and stainless steel parts by attaching
all screws.
12
Changing an oven lamp
1. Turn the oven off.
2. Loosen the lamp glass. (Stick a small screwdriver in
the small gap at the lamp glass short side and press
gentle to loosen the glass)
3. Take out the defective lamp.
IMPORTANT!
Take care not to touch the new lamp directly, for that
would reduce its service life.
4. Wear gloves or use a piece of paper to grasp and fit
the new lamp.
5. Fit back the lamp glass
PizzaMaster®