Clock Time - Blaupunkt BRIGHTON MP35 Operating Instructions Manual

CLOCK TIME

CLOCK time
Displaying the clock time
To display the clock time briefly,
press and hold down the SRC
button 2 until the clock time ap-
pears in the display.
Setting the clock time
To set the clock time,
press the MENU button 8.
Press the or
edly until "CLOCK SET" appears in
the display.
button 7.
Press the
The clock time appears in the display.
The hours flash and can be adjusted.
Adjust the hours using the / but-
tons 7.
Once the hours are set,
button 7.
press the
The minutes flash.
Adjust the minutes using the /
buttons 7.
Press the MENU button 8 twice.
Selecting 12/24-hour clock
mode
Press the MENU button 8.
"MENU" appears in the display.
Press the or
edly until "24 H MODE" or "12 H
MODE" appears in the display.
Press the or
switch between the modes.
50
button 7 repeat-
button 7 repeat-
button 7 to
When you have finished adjusting the
setting,
press the MENU button 8.
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is
off and the vehicle ignition is on,
press the MENU button 8.
"MENU" appears in the display.
Press the or
edly until "CLOCK OFF" or
"CLOCK ON" appears in the dis-
play.
Press the or
switch between the ON/OFF set-
tings.
When you have finished adjusting the
setting,
press the MENU button 8.
Briefly displaying the time when
the device is switched off
To display the time briefly when the de-
vice is off,
press the SRC
The time is displayed for eight seconds.
button 7 repeat-
button 7 to
button 2.