Blaupunkt ACD 9431 Operation Instructions Manual
Blaupunkt ACD 9431 Operation Instructions Manual

Blaupunkt ACD 9431 Operation Instructions Manual

Blaupunkt car stereo system user manual

Advertisement

Operation Instructions
ACD 9431

Advertisement

Table of Contents
loading

Summary of Contents for Blaupunkt ACD 9431

  • Page 1 Operation Instructions ACD 9431...
  • Page 2 QuickOut QuickOut Radio...
  • Page 3: Front Panel Description

    Front Panel Description 1 ON/OFF Switch on the set by turning knob 1. 2 AUD button (sound control/broader interior sound impression) BAS – Adjustment of the low frequen- cies via buttons < > 7. TRE – Adjustment of the high frequen- cies via buttons <...
  • Page 4: Table Of Contents

    Contents Front Panel Description ... 12 Important information ... 13 What you need to know! ... 13 Traffic safety ... 13 QuickOut ... 13 Installation/connection ... 14 Anti-theft coding ... 14 Wrong code number entered ... 14 Switching the code system on ... 14 Restart following interruption of power supply ...
  • Page 5: Installation/Connection

    Do not connect the loudspeaker outputs to ground! Only use the accessory and replacement parts approved by Blaupunkt. Anti-theft coding The car radio comes standard with the code system deactivated. If the anti-theft coding system is on while the power supply to the unit is interrupted (e.g.
  • Page 6: Restart Following Interruption Of

    • Turn the set on. “Cod” will appear in the display. • Enter the code number given in the Blaupunkt car radio passport and con- firm: See example “Restart following interruption …”. The code system is now deactivated. Amplifier Section...
  • Page 7: Balance And Fader Control

    Balance and Fader Control Balance control To balance the sound level left/right: Press the AUD button 2 until bal is • shown on the display. Press rocker switch < > 7 on the left or right to adjust the sound impression according to your personal preferences.
  • Page 8: Cd Section

    Mono/Stereo Operation If the lo•m button 5 is pressed longer than 2 secs. but less than 8 secs., the set swit- ches over to mono and the stereo symbol (h) goes off. If the lo•m button 5 is pressed longer than 2 secs.
  • Page 9: Changing The Audio Source With Src

    Review (Fast backward): • Keep depressed the left side of the rocker switch < > 7 for more than than 1 second. Mix Function Press the Mix button 5 to listen to the titles in an arbitrary order. When Mix is on, the “Mix” indication lights up on display 9 j.

Table of Contents