Setting The Year, Month And Date; Checking The Reference Position; Correcting The Reference Position; Resetting The Watch — All Reset - Citizen G910 Abbreviated Instruction

Setting the year, month and date

• The calendar of this watch does not have to be adjusted manually until February
28, 2100 including leap years. (perpetual calendar)
• Day of week is set while setting the time of the main watch.
1.
Pull the crown out to position
2.
Press and release the lower right button
button to adjust the date.
B
• Each time you press button
each time you press button
• It moves continuously while you are pressing and holding the button.
3.
Press and release the lower left button
and month.
• Each time you press the button, the chronograph hour and minute hands
move by 1 month.
• They move continuously while you are pressing and holding the button.
• The year corresponds to the years since leap year.
Year since leap
Indication
year
0 (leap year)
L.Y.
1 year
1
2 years
2
3 years
3
Ex.: When setting it June of 1 year since the leap year
1 year since the leap
year
4.
Push the crown in to position
.
1
or the upper right
A
, the date indication moves forward by 1 day;
B
, it moves back by 1 day.
A
to adjust the year
C
JUN (June)
to finish the procedure.
0

Checking the reference position

1.
Push the crown in to position
2.
Press and hold the lower right button
The chronograph hour and minute hands show the time of the sub watch.
3.
Press and release the lower right
button .
A
The chronograph hour, minute and second
hands and date indication move to their
current reference position.
• Correct reference positions:
Chronograph hour, minute and second
hands: 12 o'clock position
Date indication: "1"
When the current reference position is different from the correct one, adjust
the position following the steps of "Correcting the reference position".
4.
Press and release any button to finish the procedure.
• It returns to normal indication automatically in about 2 minutes without
any operation.

Correcting the reference position

1.
Pull the crown out to position
The second hand stops.
2.
Press and hold the lower left button
The mode hand, sub-watch hour and minute hands move one by one and the
alarm sounds.
3.
Press and release the lower left button
the hand/indication to be corrected.
• Each time you press the button, the target changes as follows:
Chronograph hour and minute hands → chronograph second hand →
date indication → (back to the top)
4.
Press and release the lower right button
button to adjust the target.
B
• Each time you press button
time you press the button
• They move continuously while you are pressing and holding the button.
5.
Repeat steps 3 and 4.
6.
Push the crown in to position
Resetting the watch — All Reset
1.
Pull the crown out to position
2.
Press and release buttons
All reset is executed and alarm sounds.
After All Reset
After All Reset, adjust the reference position and set the time and calendar.
2/2
G910 Abbreviated instruction
.
0
for 5 seconds or more.
A
.
2
for 5 seconds or more.
C
repeatedly to change
C
or the upper right
A
, the target moves forward by 1 step; each
B
, it move back by 1 step.
A
to finish the procedure.
0
.
2
, and at the same time.
A B C