English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual:
Component identification
Hour hand
Button
C
Sub-watch hour hand
Mode hand
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
G90* Abbreviated instruction
Checking the time with chimes
1.
Push the crown in to position
• Press button
the hand does not show it.
Minute hand
2.
Press and release the upper right button
Button
B
Combination of high and low tones of chimes tells you the time of the sub
Second hand
watch.
• The 3 tones mean "hour", "quarter of hour" and "minute" as shown below.
• Meaning of the tones
Crown
High
Low
Button
A
High-low
combination
• Ex.: 4: 36
AM/PM hand
Sub-watch
minute hand
Crown's position
To stop the chimes
0 1 2
Press any button.
Setting the time
This watch is equipped with two watches: the main watch and the sub watch.
They control hands shown as follows.
1.
Pull the crown out to position
0 second.
The second hand stops and the mode hand points "0".
• The date hand points "31". When it does not point that, adjust it later.
2.
Rotate the crown to set the time of the main watch.
3.
Press and release the lower right button
watch.
• Each time you press the button, the hands move by 1 minute.
• They move continuously while you are pressing and holding the button.
• Check whether the time set is AM or PM with the AM/PM hand.
4.
Push the crown in to position
time source.
The second hand starts moving.
1/3
G90* instruction manual
repeatedly to make the mode hand indicate the date when
C
Hight
Length
Long
Long
two short tones
1 2 3 4
1
2
High
♩ ♩ ♩ ♩
tone
♫
♫
Low
tone
Sum
4 o'clock
2 quarters
Time
4 o'clock
Hour, minute and second hands
Main watch
Sub-watch hour hand, sub-watch minute hand, AM/PM
Sub watch
hand and mode hand (date)
AM
PM
.
0
.
B
Meaning
"Hour"
"minute"
"quarter of hour"
1 2 3 4 5 6
♩ ♩ ♩ ♩ ♩ ♩
6 minutes
36 minutes
Hands
when the second hand points
2
to adjust the sub
A
in accordance with a reliable
0
Need help?
Do you have a question about the G90 Series and is the answer not in the manual?
Questions and answers