Citizen G910 Abbreviated Instruction

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual:

Component identification

Day-of-week
indication
Hour hand
Button
C
Chronograph hour
hand
Chronograph minute
hand
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.

Checking the time with chimes

• You can not use this function while using the chronograph.
1.
Push the crown in to position
2.
Press and hold the upper right button
Combination of high and low tones of chimes tells you the time of the sub
watch.
• The 3 tones mean "hour", "quarter of hour" and "minute" as shown below.
• Meaning of the tones
Hight Length
High Long
Low Long
High-low
two short tones
combination
• Ex.: 4: 36
1 2 3 4 1
High
♩ ♩ ♩ ♩
tone
♫
Low
tone
Sum 4 o'clock 2 quarters
Time 4 o'clock
To stop the chimes
Press any button.
G910 Abbreviated instruction
Chronograph
second hand
Minute hand
Button
B
24-hour hand
Crown
Button
A
Second hand
Date indication
Crown's position
0 1 2
.
0
for 2 seconds or more.
B
Meaning
"Hour"
"minute"
"quarter of hour"
2 1 2 3 4 5 6
♫
♩ ♩ ♩ ♩ ♩ ♩
6 minutes
36 minutes
G910 instruction manual

Setting the time and day of week

This watch is equipped with two watches: the main watch and the sub watch.
They control hands shown as follows.
Hour, 24-hour, minute and second hands
Main watch
Chimes (Chronograph hour and minute hands when
Sub watch
adjusting the time)
1.
Pull the crown out to position
0 second.
The second hand stops and the chronograph hour and minute hands indicate
the hour and the minute of the sub watch respectively.
2.
Rotate the crown to set the day of week of the main watch.
• The hour, minute and 24-hour hands move synchronously.
• Rotate the crown left and right and move the hour hand from PM 10 to
AM 2 to move the day-of-week hand quickly.
3.
Rotate the crown to set the time of the main watch.
• Check whether the time set is AM or PM with the 24-hour hand.
4.
Press and release the lower right button
button to adjust the sub watch.
B
• Each time you press button
time you press the button
• They move continuously while you are pressing and holding the button.
• Check whether the time set is AM or PM with the chronograph second
hand.
AM (12 o'clock position)
5.
Push the crown in to position
time source.
The second hand starts moving.
1/2
Hands
when the second hand points
2
or the upper right
A
, the hands move forward by 1 minute; each
B
, they move back by 1 minute.
A
PM (1 o'clock position)
in accordance with a reliable
0