CHAPTER 6. NAT TRANS
6.1 Stun Setting
This page defines the STUN Enable/Disable and STUN Server IP address on this page. This function can
help your Phone Adapter work properly behind NAT. To change this setting, please follow your ISP
information. When you finish the setting, please click the Submit button.
6.2 PC Setting
This page defines the PC setting on this page.
Field
Device Activity
PC IP address
Description
The default is Bridge mode, and it also provides NAT mode.
Bridge: When set as mode, the LAN and PC ports are in the same
network segment.
NAT: The LAN and PC ports are in a different network segment, and PC
port could enable the DHCP Server function to allot the IP address.
The IP address of PC port. (In the Birdge mode, the Default IP:
-39-
Users Manual of VIP-156/156PE/157S