Introduction - IDTECH ValueScan III IDBB-4244MRB User Manual

1. Introduction

Your VALUESCAN III is a 1D CCD scanner that has
been configured at the factory with default
settings.
Because many host systems have unique formats
and protocol requirements, ID TECH provides a
wide range of configurable features that may be
selected using this bar code-based configuration
tool. After configuration, the scanner stores the
settings in nonvolatile memory. The embedded
memory saves the settings when the power is
turned off.
Turn off the computer's power before connecting
the scanner; power up the computer after the
scanner is fully connected.
To change a parameter value, scan the appropriate
bar codes in this guide. These new values replace
the default values in memory.
Note: Most computer monitors allow you to scan
bar codes directly on the screen. When scanning
from the screen, make sure to set the document
magnification to a level where you can see the bar
code clearly and that bars or spaces are not
merging.
Page | 6