Symptoms - Flymo EasiLife 200 Operator's Manual

6.5 Symptoms

If your product does not work as expected, follow the symptoms guide below.
There is a FAQ (Frequently Asked Questions) on www.flymo.com/uk which provides more detailed
answers to a number of standard questions. Contact Flymo customer service if you still cannot find the
reason for the fault.
Symptoms Cause
The product has The guide wire is not laid in a long
difficulty docking. straight line that is far enough out from
the charging station.
The guide wire is not inserted in the
slot under the charging station.
The charging station is not on a level
surface.
The product runs The clock or the date in the product is
at the wrong time not correct.
The start and stop times for mowing
are incorrect.
The product vi- Damaged blades lead to imbalance in
brates. the cutting system.
Too many blades in the same position
lead to imbalance in the cutting system.
Different versions (thickness) of blades
are used.
The product runs, The product searches for the charging
but the blade disc station, or is driving to the starting
does not rotate. point.
The product mows Grass or other foreign object blocks the
for shorter periods blade disc.
than usual be-
The battery is spent.
tween charges.
Dull blades. More energy is needed
when cutting the grass.
46 - Troubleshooting
Action
Check that the charging station has
been installed according to the instruc-
To install the charging station
tions in
on page 20
It is absolutely critical for operation that
the guide wire is perfectly straight and
is in the correct position under the
charging station. Therefore make sure
that the guide wire is always in its slot
in the charging station. Refer to
stall the guide wire on page 21 .
Place the charging station on a surface
that is entirely level. Refer to
ine where to put the charging station on
page 14 .
Set the clock or date. Refer to
the time & date on page 29 .
Change the schedule settings. Refer to
To reset the schedule setting on page
25 .
Inspect the blades and screws and re-
place them if necessary. Refer to
place the blades on page 36 .
Check that only one blade is fitted at
each screw.
Check if the blades are of different ver-
sions.
No action. The blade disc does not ro-
tate when the product is searching for
the charging station.
Remove and clean the blade disc. Re-
Clean the product on page 35 .
fer to
Replace the battery. Refer to
on page 36 .
Replace the blades. Refer to
the blades on page 36 .
To in-
To exam-
To set
Re-
Battery
Replace
1392 - 001 -