Schedule And Standby - Flymo EasiLife 200 Operator's Manual

5. Check that the indicator lamp on the keypad
is not lit.

4.6 Schedule and Standby

The product has an inbuilt standby period
according to the Standby time table. The standby
period provides for instance a good opportunity to
water or play games on the lawn.
The standby time is depending on how much
active time (cutting and searching) the product
has each day. The active time is in turn
depending on for example battery capacity,
slopes and grass growth. When the product has
operated the allowed active period in a day, the
Today's mowing complete is shown in
message
the display. The product is then in standby mode
until next day.
If the schedule setting is divided into 2 work
periods, the standby period can be divided into a
number of periods. The minimum standby period
time must however be according to the Standby
time table.
Product work capacity
2 2
500 m / 13500 ft
2 2
350 m / 10500 ft
2 2
200 m / 5500 ft
4.6.1 Example 1
This example is applicable to products with a
specified work area of 500 m
the same for the other models.
Schedule setting, Period 1: 8:00-22:00.
Active period (A): 8:00-20:00.
The schedule settings ensure that the product
begins cutting the lawn at 08:00. At 20:00 the
product has reached the maximum available
operating hours and is therefore parked in
standby mode. The product starts cutting the
grass again next day at 08:00.
1392 - 001 -
Standby time, mini-
mum hours per day
12
16
18
2
, but the principle is
Example: A specified work area of 500 m
Operation, A = max. hours
Charging/Standby, B = min. hours
4.6.2 Example 2
This example is applicable to products with a
specified work area of 500 m
the same for the other models.
Schedule setting Period 1 (A): 8:00-17:00.
Schedule setting Period 2 (C): 20:00-24:00.
Active period (A): 8:00-17:00
Active period (C): 20:00-23:00.
The product operates between 08:00 and 17:00.
It starts again at 20:00 but at 23:00 the product
has reached the maximum available operating
hours and is therefore parked in standby mode.
The product starts cutting the grass again next
day at 08:00.
2
12
12
2
, but the principle is
Operation - 33