Page 2
For more information and instructions, please read the complete supplied Operator‘s manual or visit the Flymo website www.flymo.com/uk. Installation support videos can be found on the www.flymo.com/uk website. 1. To install the charging station 1. Attach the charging tower to the baseplate.
Page 3
3. To connect the boundary wire 1. Open the connector and lay the boundary wire in the connector. 2. Press the connector and the wire together by using a pair of pliers. 3. Cut off the wire 1-2 cm / 0.4-0.8 in. after the connectors. 4.
Page 4
DL5 6UP Helpline Number: 0344 844 4558 Copyright@ 2019 Flymo S.A. All rights reserved Flymo and other product and feature names are registered trademarks of Flymo S.A. The Husqvarna UK policy of continuous improvement and updating means that specifications can be altered without prior notice. All measurements quoted are approximate.